10. Close and lock the access door.
11. Close the protective door over | Step 10 |
the memory socket. Insert and |
|
tighten the T6 TORX screw to |
|
secure the door closed. |
|
12.Install the battery and the battery door. Reattach the
hand strap to the terminal (99EX models only).
13.Press the Power key or the SCAN key to wake the terminal.
Installing a SIM Card
1.Press the Power key 
to put the terminal in Sus- pend Mode.
2.Release the hand strap hook near the speaker on the back panel of the terminal (99EX models only).
3.Remove the battery door.
4.Wait at least 3 seconds, then remove the battery.
5.Remove the T6 TORX screw securing the protective door closed.
6.Lift up the lower left corner of the door to access the SIM card socket.
Step 5
Step 6
18