Install the Main Battery Pack

The 99EX/99GX is shipped with the battery packaged separate from the terminal. Follow the steps below to install the main battery. For information on how to remove the battery, see page 6.

!in the terminal. Mating wet components may cause damage not covered by the warranty.

1.Release the hook securing the hand strap to the back panel of the terminal (99EX only).

2.Remove the battery door by lifting up the latches near the base of the battery door.

3.Insert the battery into the battery well.Ensure all components are dry prior to placing the battery

2

3

4.Replace the battery door. Apply pressure to engage the door latch. The battery door must be installed prior to powering the unit.

5.Reattach the hand strap (99EX only).

6.Connect the terminal to one of the 99EX series charging peripherals to charge the main battery pack.

We recommend use of Honeywell Li-poly or Li-ion

! battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.

6