Soft Reset (Warm Boot)

A soft reset re-boots the device and preseves any objects created in RAM.

1. Press and hold the CTRL

ALT

+ ENTER

ENT

keys

CTRL

 

for approximately 5 seconds.

2. The decode and scan LEDs flash for approximately three seconds as the terminal resets.

3. When the reset is complete, the Today screen displays.

Hard Reset (Cold Boot)

A hard reset re-boots the device and closes any open applications running in RAM at the time of the reset.

1.Press and hold the CTRL approximately 5 seconds.

ALT

+ ESC

ESC

keys for

CTRL

 

2.The decode and scan LEDs light for approximately 3 seconds.

3.The terminal re-initializes.

Factory Reset

Contact a Honeywell technical support representative for information on how to perform a factory reset. For contact information, see Technical Assistance on page 24.

23