Honeywell EKZ008200B E3- Understanding the system tones, Sirens, adjusted by the installer

E3- Understanding the system tones

N	SIRENS
G	A siren is an effective deterrent due to its power and very irritating tone.
	The system has a siren built in the control panel. An optional remote

Lsiren can be added.

I In addition, the panel built-in siren emits an audible confirmation

Stone when arming and disarming the security system and a fire tone when a smoke detector is triggered. The volume levels can be

H	adjusted by the installer.
	SYSTEM TONES
		Sequence of 3 modulated sounds			When arming total set, confirms that the
	TOTAL SET
					control panel has received a valid code or
	ARMING
			Duration : 4 seconds		TAG and is preparing to arm total set.
	PART SET	Sequence of 2 modulated sounds			When arming the part set, confirms that
	ARMING				the control panel has received a valid
	ANNEX SET				code or TAG and is preparing to arm part
		Duration : 2,5 seconds
	ARMING				set.
			Upon arming...
	EXIT DELAY				Beeps sound at the end of the exit time
					until the system is armed.
		One beep per second
				Upon entry...	After you open the entry door, the entry
					time starts. You should disarm your
	ENTRY DELAY
					system within this time. Beeps sound at
		One beep every second
					the end of the entry time.
			Continuous beep		When Disarming, confirms that the
	DISARMING				control panel has been successfully
		Duration : 2,5 seconds			disarmed.
	FAULT		2 times 7 fast beeps		This tone indicates a fault in the system.
		4 beeps in case of alert...			Confirms the transmission of an alert to
	ALERT
					the Alarm Receiving Centre.
		sent via the keypad

- 4 -