EDURESS CODE 
N | A duress code can be used if you are forced to disarm your security system under |
|
duress. Your duress code is +1 to your code (1234 => 1235, 6789 => 6780). The |
| |
G | system will disarm as normal however a silent alert signal is transmitted to your |
|
L | Alarm Receiving Centre. | Code + 1 |
| ||
|
| |
I | INCORRECT CODE PROTECTION |
|
S
H
If you enter five successive incorrect codes or present five incorrect TAGs, the keypad is blocked for 5 minutes.
SENDING A PANIC SIGNAL
You can send an instant panic alarm whenever you feel threatened whilst at home, even when your system is not armed :
Press the “SOS” keys simultaneously.
The siren is triggered (depending on configuration).
The Alarm Receiving Centre is alerted.
KEYPAD DISPLAY
Your keypad is equipped with a display to ease access to advanced user functions and rich content. Menu functions are only accessible when the system is disarmed.
The display icons provide a quick view of the system status.
Total set armed
Part set armed
Annex set armed
System disarmed
Annex set disarmed 
Receiver 1 ON
Receiver 2 ON
Radio transmission in progress 
Silent mode
Unread message Detector activated Tamper fault System fault Bypassed detector Power supply fault State of keypad battery Blinking = replace battery
The navigation keys are used to access the menu:
•Press the arrow keys 
to enter the main menu, navigate and view choices identified by brackets “< >”,
•Press the 
key to confirm your choice,
•Press the Return key 
to abort your choice and return to the main menu.
- 6 -
