Honeywell Electronic Programmable Thermostat owner manual Cooling will not come on

Heating will not come on.	■ Check the system fuse or circuit breaker and replace or
(Continued)	reset, if necessary.
	■ If display is blank or displays bAt Lo, install fresh
	batteries.
	■ If temperature setting is higher than current temperature,
	and SYSTEM ON indicator is lit, contact your local
	dealer.

Cooling will not come on.

■Check that switch on thermostat is set to COOL. Allow a minimum of five minutes for time-guard protection to expire.

■Check the system fuse or circuit breaker and replace or reset, if necessary.

■If display is blank or displays bAt Lo, install fresh batteries.

■The thermostat has a built-in time delay on cooling. Allow at least five minutes after changing the setting before the air conditioner starts.

■Make sure outdoor disconnect is engaged (on).

13 69-0862—2