Honeywell Electronic Programmable Thermostat owner manual SET Current TIME/DAY, Heating Program

IMPORTANT

Batteries are required for operation and programming. When inserting batteries, set the system switch to OFF. Remove the battery door (on the thermostat left side) using a coin at the bottom. See Maintaining Your Thermostat section.

SET CURRENT TIME/DAY

To set the time, press and release the Set Clock/Day key once. Press the Time keys until the current time shows.

To set the day, press and release the Set Clock/Day key again. Press the Time keys until the current day shows. Press the Run Program key.

HEATING PROGRAM

With the system switch at HEAT, press and release the Set Schedule key once. WAKE, Mon-Fri, and SET appear on the display.

Use Time keys to program WAKE time and Temp keys to program WAKE temperature for Mon-Fri. Repeat sequence for LEAVE, RE- TURN, and SLEEP.

USE TO SET

WARMER TEMPERATURE

LCD DISPLAY

USE TO SET

TIME EARLIERRUN PROGRAM

KEY

AM

TU

LEAVE

				HOLD
Fan Auto On	System	Cool Off Heat		TEMP
				KEY
USE TO
SET CURRENT			USE TO
DAY AND TIME	USE TO SET
			SET COOLER
USE TO SET	TIME LATER		TEMPERATURE
				M8473
PROGRAM PERIOD

6 69-0862—2