COACH | INSTALLATION GUIDE |
LON Interfaces
In order to connect to the LON network, one of the following interfaces must be installed:
•Echelon
•Echelon
•Echelon U10 USB Stick (Laptop and Desktop)
•Loytec
•Loytec
The function of COACH is supported for these LON interfaces, however other cards may work also.
Please install the LON interfaces and the corresponding drivers. For relevant documentation and driver please refer to corresponding websites at http://www.echelon.com and http://www.loytec.com.
IMPORTANT
For Echelon LON interfaces, install the driver before the installation of the physical device.
For all LON interfaces, perform a test after installation for proper function of the installed interface.
Font Size Setting
For proper display of custom graphics created with ARENA Editor do not change the font size from Normal size (96 DPI) to Large size (120 DPI) under Settings – Control Panel – Display – Settings – Advanced – DPI Setting.
INSTALLATION
IMPORTANT
•Please ensure you are logged onto Windows XP as a user with Administrator privilege having a username and a password in order to be able to install SQL. You must enter a password, otherwise SQL is installed incompletely.
•For automatic Windows logon a registry entry needs to be created with username and password.
•Please deactivate energy saving options for the PC.
Prerequisites The LON interface including the appropriate driver must be installed before hand. Install driver before installing the LON interface hardware.
COACH needs the following prerequisite software packages for proper operation:
•Microsoft SQL Server 5.1
NOTE: If Full SQL Server is to be used, Microsoft SQL Server 2005 Service Pack 2 must be installed for proper operation. Microsoft SQL Server is available in the COACH Setup folder. During installation, software automatically checks the PC system and asks for appropriate installation steps in order to provide the prerequisite SQL software.
NOTE: During installation, some steps take long, for example the database creation may take up to 15 minutes. Do not shutdown the PC or do any other actions which may interrupt or cancel the installation.
1.Uninstall previously installed COACH 2.0 software version using the Add or Remove function in the Windows Control Panel.
2.Disable automatic Windows logon.
3.Reboot the PC.
8 |
