Honeywell FUSION user manual Performing AN Object Search

SEARCH OPTIONS

6.14OBJECT SEARCH, CONTINUED

1 5

2

3

4

1	Start	Displays the time and date of the initial key frame.
2	Sensitivity	Used to control sensitivity of the motion to be
		detected. Poor lighting conditions can often be
		interpreted as motion; the sensitivity setting can
		compensate for this.
3	Key Frame Search	Searches by key frame.
4	Show Detected	Displays the results as they are found. Using this
	Image	option slows the search process slightly and
		therefore may not be ideal when searching large
		periods of time.
5	End	Used to designate an end time. (Default is 1 hour.)

6.14.1PERFORMING AN OBJECT SEARCH

1.Select a single camera, either by turning off all cameras but one or by double- clicking a displayed image.

2.Select the Object Search button.

3.Create a motion region box on the image by clicking inside the image and holding down the left mouse button while dragging the pointer. When the desired shape is created, let go of the mouse button. Only one motion region box can be created.

To delete the motion region box, press the Clear Selection button.

4.Press the Start Search button. The Object Filter Search information should open.

5.Select an end time. One hour is the default setting.

6–15