Honeywell FUSION user manual Advanced PTZ Setup

PAN / TILT / ZOOM

7.3ADVANCED PTZ SETUP, CONTINUED

1	Camera Menu	Opens the OSD PTZ camera menu.
2	On-Screen Compass	Allows On-Screen control of a PTZ camera.
3	RS-232 / RS-485	Defines how to send the PTZ signal to the camera.
4	Select Camera	Selects the current camera to be edited.
5	Port Settings	Defines the specific settings to transmit to the PTZ.
6	Enable Pan/Tilt	Enables the DVR to control the PTZ camera.
7	Preset and Tour	Used to create Presets and Tours for the PTZ
		camera. Since each camera creates these in a
		different way, there can be multiple methods.
8	Protocol	Selects the protocol to use for the selected camera.
		The protocol is the unique set of instructions that
		allows the DVR to communicate with the PTZ
		camera.
9	PTZ Status on Close	This option will activate a Tour or Preset when the
		PTZ controller is closed.
10	Address Setting	Only available on select PTZ cameras. These options
		need to be set when there are more PTZ cameras
		connected together than there are inputs on the
		DVR. Setting these options allows for attaching
		several DVRs to the PTZ chain.
11	Open PTZ Controller	Opens the PTZ controller, allowing the PTZ camera
		to move.
12	Pan Speed	Increases or decreases the Pan speed.
		Increases or decreases the Tilt speed.
	Tilt Speed
		Increases or decreases the Zoom speed.
	Zoom Speed
		Increases or decreases the Focus speed.
	Focus Speed

7–5