Honeywell Galaxy 2 manual Setting the System - Full Set, Wireless Keyfobs, KTC805 Keyfob, Keypad

Wireless Keyfobs

Keyfobs are portable controllers that can be attached to a key ring. They will allow you to Set and Unset the system by a single press of a button and can sometimes be programmed with additional functions. Because they operate by radio, they can be used anywhere around the premises provided that they are within range of the installed radio receiver.

NOTE: Labels are provided to place over the buttons to indicate the function.

Begin Full		SOS
Set Procedure
(Button 1)
Unset/Cancel
(Button 2)
Begin Part	SOS
Set Procedure
(Button 3)
Begin Night
Set Procedure
(Button 4)

5804 Keyfob KTC805 Keyfob

Setting the System — Full Set

To set the system, make sure all doors are closed and windows are secure. The system cannot be set if there has previously been an alarm which has not been reset.

To set the entire system:

Keypad:	5804 Keyfob:	KTC805 Keyfob:
Type your PIN	Press the ON button	Press button 1 on the
code	on the keyfob.	keyfob. (Full setting
then press [A]	(Full setting will	will commence as per
	commence as per	keypad procedure)
	keypad procedure)

Prox Tag:

Hold the tag in front of the prox symbol for three seconds

The exit timer will begin and there will be a constant tone. Leave by the agreed exit route and close the door. When the exit timer expires, there will be a five-second settling period and then two beeps will confirm the completion of setting.

FULL SET 060

4