If you hear a rapid beeping sound, the system cannot set as there are open zones. The keypad will show which zones are open.
Open Zone | 1044 |
|
|
NOTE: Display not shown when using wireless keyfobs to set the system.
The setting procedure can be cancelled at any time during the exit time by pressing the esc key on the keypad, the [OFF] button on the keyfob or placing the tag back in front of the prox symbol.
Setting the System — Part or Night Set
Part and Night setting are similar to Full setting but leave off certain detectors as agreed with your installer. Additionally, the system can be programmed by the installer not to give any exit timer tones during the setting period (silent set).
To Part or Night set:
Keypad:
Type your PIN code then press [B]. Press [1] Part Set or Press [2] Night Set.
5804 Keyfob:
Press the [Lower Left] button (Part) or Press the [Lower Right] button (Night).
KTC805 Keyfob: Press button 3 (Part setting will com- mence) or
press button 4 (night setting will com- mence)
Prox Tag:
Use the keypad for Part or
Night setting.
The tag will only Full Set.
A 30 second exit timer will begin. Leave the protected area by the agreed route. A double beep at the end of the exit time will confirm setting.
PART SET | 030 |
|
|
NOTE: Display not shown when using wireless fobs to set
the system.
5