-15 -
<Fig5-7. NIGHTSHOT Control>
<< NIGHTSHOT MODE >>
①MODE
②DETECT TIME
③D→N LEVEL
④N→D LEVEL
⑤NIGHT COLOR
RETURN
AUTO
3sec.
3
7
B/W
5.8 NIGHTSHOT MODE
①MODE
: The Nightshotmenu allows you to set how the camera reacts to
changes in low light illumination and to set when the camera switches
between Night and Day modes.
AUTO –The camera removes or inserts IR cut filter by auto detecting
luminance.
ON –IR cut filter is removed (Night mode)
OFF –IR cut filter is inserted (Day mode)
MODE OFF →AUTO →ON →….
②DETECT TIME
: Sets the time –1 to 10 seconds – before the camera switches to Day
or Night mode after detecting a low light condition.
DETECT TIME 1 sec. →2 sec. →…. →10 sec.
③DAY to NIGHT threshold
: Determines the low light detection level –1 to 10 – when the camera
switchsto Night mode. The lower the value, the darker the lighting
conditions befroethe camera switches.
D→N LEVEL 1 →2 →3 →…. →15
④NIGHT to DAY threshold
: Determines the low light detection level –1 to 10 – when the camera
switches to Day mode. The higher the value, the brighterthe lighting
conditions before the camera switches.
N→D LEVEL 15 →9 →8 →…. →1
☞
Notice
MODE must be set to AUTO. D->N LEVEL must be set at least 2 less than
the N->D LEVEL setting.
<Fig5-8. BLC/WDR MODE >
<< BLC/WDR MODE >>
①MODE
②LEVEL
RETURN
WDR
8
5.9 BLC/WDR MODE
①MODE
: Prevents the object in the center of the image from darkening
(silhouette effect) when there is excessive light from behind.
MODE OFF →BLC →WDR →….
WDR [Wide Dynamic Range]is one of Backlight Compensation,
you can watch not only the object in the center but alsothe objects
around clearly.
②LEVEL
: Adjust the proper level for WDR.
LEVEL 0 →1 →2 →…. →15
☞
Notice
If you set WDR ON, you will not be able to digital zoomin or out.
⑤NIGHT COLOR
: Set the color mode as B/W (monochrome) or COLOR in Night mode.
NIGHT COLOR B/W →COLOR →….
☞
Notice
MODE must be set to AUTO or ON.