Honeywell HCE 60 Completing start-up

Assigning zones and issuing room names

The colors of LEDs 1 through 8 now provide information on a fault in

the temperature zones:

Off No fault

Red Cable break / no connection to setpoint adjuster

Green No connection to Hometronic Manager resp. wireless

setpoint adjuster HCU 30

Orange No connection to setpoint adjuster and Hometronic Man-

ager

The storey controller exits the fault display after approx. 60 seconds

and returns to normal mode.

Completing start-up

Closing setpoint adjuster

► Replace cover and snap in both snap locks.

Handing over zoning plan

► Hand over the completed zoning plan and the installation instructions

to the customer. Both documents are important, as changes to the

system may be made in future.

Contents

Main Page Contents Page Overview Application Installation procedure Creating a zoning plan Determining temperature zones Filling out zoning plan Page Page Page Installation Wall installation Page Page Opening housing Cabling connections Page l Page Page Page Page Start-up Preparing for start-up Page LED indicators on storey controller Operating modes of storey controller Buttons Cooling function Assigning zones and issuing room names Example: Assigning an HCW 22 setpoint adjuster to zone 1 Example: Assigning room name LIVING to zone 1 Page Assigning wireless setpoint adjuster HCU 30 to a temperature zone Assigning setpoint adjusters of type HCW 23 to a zone Assigning room names for cooling function Canceling assignment Deleting assignment of a room name at the Hometronic Manager Saving settings on Hometronic Manager Checking configuration Checking wireless transmission Checking assignment of room names Displaying faults Completing start-up Resetting storey controller to state of delivery Appendix Glossary Help with problems Page Page Overview of Hometronic heating components Zoning plan