HUT-102_OM_Rev0.qxd 3/17/05 4:04 PM Page 4

Filling

• Remove the Water Tank by grasping handle and pulling straight up (Fig. 1). Fig. 1 Set aside.

•Turn the Water Tank upside down so that the Tank Cap is facing up;

unscrew the Tank Cap by turning it counter-clockwise and set aside.

• Fill the Water Tank with clean, cool, tap water (Fig. 2).

• Replace the Tank Cap by firmly turning clockwise . Turn the Water Tank upright and check the Tank Cap for leaks. If any water drips from the Tank Cap, remove it and re-tighten. Use of very cold water may

temporarily reduce the mist output. Never fill the humidifier with hot or Fig. 2 warm water as this could cause damage and void your warranty.

NOTE: When carrying the filled Water Tank, please use the handle and place your other hand under the tank for additional support.

•Position the Water Tank in the humidifier and push into place. Some water will empty into the Base.

• Once the filled tank has been positioned, do not attempt to move the humidifier. If it has to be moved, unplug the humidifier and remove the Water Tank first.

Operation

P O W E R

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL SHOCK COULD OCCUR.

•With the power switch in the OFF position, plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

1.Turn the Power Switch clockwise to the on position. The Water Window will illuminate.

2.Set your desired output by turning the knob clockwise. To operate on HIGH, turn the dial to the end ( ) (Fig. 3).

Fig. 3

3.Mist will not appear immediately; allow a few minutes for the water to fill the reservoir. If you are using the optional Demineralization Cartridge, it may take up to 15 minutes for the filtering material to become saturated and for mist to appear.

4.The unit will shut off when it is out of water.

5.Turn the humidifier off before removing and refilling the Water Tank. When the Water Tank is empty the mist will stop although the fan will continue to operate.

4

Page 3 Page 5
Page 4
Image 4
Honeywell HUT-102 important safety instructions Filling, Operation, W E R
Page 3 Page 5

HUT-102 specifications

The Honeywell HUT-102 is a sophisticated and reliable environmental monitoring solution designed to help organizations maintain optimal conditions for various applications. This advanced device is particularly suitable for industries such as pharmaceuticals, food and beverage, laboratories, and other critical environments where precise temperature and humidity control is essential.

One of the standout features of the HUT-102 is its dual-sensor technology, which allows it to accurately measure both temperature and humidity simultaneously. This feature is critical for applications where monitoring environmental conditions is essential to product quality and compliance with industry standards. The device employs high-precision sensors to ensure that readings are accurate and reliable, reducing the risk of environmental monitoring failures.

The HUT-102 boasts a user-friendly interface, enabling easy navigation and configuration. Its large, backlit display provides clear visibility of readings, allowing users to quickly assess environmental conditions even in low-light settings. Furthermore, it includes programmable alarms that notify users of any deviations from predefined thresholds, ensuring prompt actions can be taken to correct any issues.

In terms of connectivity, the Honeywell HUT-102 supports various communication protocols, facilitating integration into existing monitoring systems. Whether via wired or wireless connections, the device can provide real-time data to centralized monitoring systems, enhancing the overall visibility and control over environmental conditions.

Durability is another key characteristic of the HUT-102. It is designed to withstand the rigors of various industrial environments while ensuring longevity. The housing is rugged and resistant to environmental factors that could compromise its functionality, making it a suitable choice for both indoor and outdoor applications.

Moreover, the HUT-102 features advanced data logging capabilities. It can store historical data on temperature and humidity levels, which can be invaluable for audits, compliance reporting, or analysis over time. This ability to review trends and historical data aids organizations in making informed decisions regarding their environmental management strategies.

In conclusion, the Honeywell HUT-102 is a high-performance environmental monitoring solution equipped with advanced features, reliable technologies, and robust characteristics that cater to the demanding needs of various industries. Its combination of precision measurement, user-friendly design, connectivity options, and data logging makes it an excellent choice for effective environmental management.
Top Page Image Contents