Install the Cradle U-Bracket

Note: Honeywell does not supply the bolts or washers needed when mounting the cradle assembly to the vehicle chassis. Use bolts with a maximum 10/32” (0.3125) diameter.

See Also: "Components"

Attach the U-Bracket to the vehicle, making sure it does not impede safe operation of the vehicle.

Attach the Passive Cradle to the U-Bracket using the Angle Adjust knobs.

Use both knobs to loosen and tighten the cradle to the U-bracket while determining the best viewing angle.

The passive vehicle mounted cradle is ready for use.

Periodically test the mounting device and tighten bolts and/or knob as needed.

If the cradle becomes cracked or warped it must be replaced before the cradle is put back in service.

3-5