DC to DC Power Supply Installation

For use with Honeywell power supplies:

•9000301PWRSPLY – Power Supply, 18-60VDC with cable

•9000302PWRSPLY – Power Supply, 60-110VDC with cable

Connecting Electrical Cables to Power Sources

The DC to DC power supply is used to provide vehicle power to the MX7 Tecton when placed in a DC powered vehicle dock.

Specifications for Electrical Supply

Input Voltage

Always observe input voltage range specified on the DC to DC power supply.

 

 

Output Voltage

12 VDC ± 10%

 

 

Power

50 W

 

 

Fuse

5 A (slow blow fuse). Fuses are USER SUPPLIED

 

 

Note: Refer to the Wiring Schematic for wiring colors and connections.

Caution: For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This fused circuit requires a five Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply connection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the battery positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.

Caution:

For installation by trained service personnel only.

4-12