Honeywell STR93D, STR94G manual ANSI Class 150/300/600

34-ST-03-57 Page 20

STR9xx

TABLE II - SEALS (continued)							3D	4G
	Diaphragm	Flange Size	Flange Pressure Rating Dependent			Selection
	Diameter		on Customer Flange
	3.5"	3"	ANSI Class 150/300/600			_ _ _ GFA _ _ _ _ _ _	•	•
			Diaphragm		Body	Selection
			316L SS		316 SS	_ _ _ _ _ _ GA _ _ _ _	•	•
	Wetted Material		Hastelloy C		316 SS	_ _ _ _ _ _ GB _ _ _ _	•	•
			Hastelloy C		Hastelloy C	_ _ _ _ _ _ GC _ _ _ _	•	•
			Monel		Monel	_ _ _ _ _ _ GE _ _ _ _	•	•
			Tantalum		Tantaluma	_ _ _ _ _ _ GG _ _ _ _	1	1
	Non-Wetted Materials		No		Selection	_ _ _ _ _ _ _ _ 0 _ _ _	•	•
	No Selection		No Selection			_ _ _ _ _ _ _ _ _ 0 _ _	•	•
				None		_ _ _ _ _ _ _ _ _ _ A _	•	•
Pancake Seal	Calibration Rings			316 SS		_ _ _ _ _ _ _ _ _ _ B _	5	5
			Hastelloy C			_ _ _ _ _ _ _ _ _ _ C _	5	5
				Monel		_ _ _ _ _ _ _ _ _ _ D _	5	5
	Flushing		None			_ _ _ _ _ _ _ _ _ _ _ 0	•	•
	Connections		One 1/4" with plastic plug			_ _ _ _ _ _ _ _ _ _ _ H	6	6
	and Plugs**		One 1/4" with metal plug			_ _ _ _ _ _ _ _ _ _ _ J	6	6
	Metal plug material		Two 1/4" with plastic plugs			_ _ _ _ _ _ _ _ _ _ _ M	6	6
	will be the same as		Two 1/4" with metal plugs			_ _ _ _ _ _ _ _ _ _ _ N	6	6
	Lower material, if		One 1/2" with plastic plug			_ _ _ _ _ _ _ _ _ _ _ P	6	6
	metal plug is chosen -		One 1/2" with metal plug			_ _ _ _ _ _ _ _ _ _ _ Q	6	6
	(SS Plug for CS Lower		Two 1/2" with plastic plugs			_ _ _ _ _ _ _ _ _ _ _ R	6	6
	and Tantalum Clad)		Two 1/2" with metal plugs			_ _ _ _ _ _ _ _ _ _ _ S	6	6
						Table II continued below

a Tantalum Body has Tantalum wetted parts and 316SS non-wetted parts

***Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation

STR9xx

TABLE II - SEALS (continued)							3D	4G
	Diaphragm	Flange Size	Flange Pressure Rating			Selection
	Diameter
	3.5"	Taylor				_ _ _ HM0 _ _ _ _ _ _
		Wedge 5"		750 psi			v
		O.D.
			Diaphragm		Body	Selection
Chemical Tee	Wetted Material		316L SS		316 SS	_ _ _ _ _ _ HA _ _ _ _	•
			Hastelloy C		316 SS	_ _ _ _ _ _ HB _ _ _ _	•
"Taylor" Wedge			Hastelloy C		Hastelloy C	_ _ _ _ _ _ HC _ _ _ _	•
	Non-Wetted Material		No Selection			_ _ _ _ _ _ _ _ 0 _ _ _	•
	Bolts		No Selection			_ _ _ _ _ _ _ _ _ 0 _ _	•
	Styles		No Selection			_ _ _ _ _ _ _ _ _ _ 0 _	•
	No Selection		No Selection			_ _ _ _ _ _ _ _ _ _ _ 0	•

Table II continued next page