INTRODUCTION

Thank you for selecting the Honeywell Barometric Weather Forecaster. This device combines precise time keeping with monitoring and displaying the temperature/humidity data from up to three remote locations.

In this package you will find:

One main unit (receiver) TE653ELW

One three-channel remote temperature and humidity sensor (transmitter) TS33C

One User Manual

Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know.

STANDARD PACKAGE CONTENTS

Picture

Components

Main Unit (receiver)

Thermo Hygrometer Sensor (transmitter)

3

BEFORE YOU BEGIN

We recommend using alkaline batteries for the remote temperature and humidity sensor and the main unit when temperatures are above 32°F (0°C). We recommend using lithium batteries for the remote sensor when temperatures are below 32°F (0°C)

Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements)

ALWAYS install batteries in the remote sensor before the main unit

Insert batteries before first use, matching the polarity in the battery compartment

Remove protective plastic screen from LCD display (if any)

During an initial setup, place the remote sensor close to the main unit

After reception is established (all remote readings will appear on the main unit’s display), position the remote sensor and the main unit within the effective transmission range of 100 feet (30 meters).Ideally it should be placed within the line of sight from the main unit.

Transmission/reception range may be affected by trees, metal structures and electronic appliances, by surrounding building materials and the way how the receiver (main unit) and transmitter (remote sensor) are positioned.

The main unit must be placed indoors.

Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls and furniture.

NOTE: When the temperature falls below freezing, the batteries in the outdoor remote sensor may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below.

IMPORTANT: Make sure that remote sensor is easily accessible for cleaning

34

Page 2
Image 2
Honeywell TE653ELW user manual Introduction, Standard Package Contents, Before YOU Begin