Honeywell TE821WD user manual

A.UP

B.DOWN

C.SET

D.CHANNEL

E.MEMORY

F.HISTORY

G ALARM/CHART

H. SENSOR

–AUTO, ON, OFF I. SENSITIVITY

–HIGH/LOW

J LIGHT/SNOOZE

K. AC/ DC ADAPTOR INPUT

-Selects the next available window counter-clockwise

-Increases parameters

-If pressed and help, activates an atomic time signal search

-Selects the next available window clockwise

-Decreases parameters

-If pressed and help, activates all remote sensors signal search

-Alternates the parameters for the selected window

-If depressed and held, enters into the programming mode or changes parameter’s units

-Pressed again closes programming mode and confirms selected parameters

-Manually selects the channel # for receiving temperature and humidity sensor data

-Enables the temperature and humidity channel auto-scan mode

-Records: moon phase, temperature, humidity, rainfall and wind records. Then stores in memory

-Moon phase: Determined by the day of month interval

-Sets and stores pressure & altitude units in Memory

-Allows displaying the sea-level pressure history

-Displays alarm times and programmed alerts for temperature, rainfall and wind.

-Press and hold, to enter the alarm/alert programming mode

-Press and hold in pressure and forecast window, to view different bar charts

-Sets the light sensor to: automatic, on or off

-Adjusts the automatic light sensor sensitivity

-Illuminates the display backlight for 5 seconds

-Activates Snooze delay for alarms (programmable 1 to 15 minutes)

-Connects main unit to the power outlet through the AC to 7.5V DC adapter provided

12