Honeywell TE831W-2 user manual Rain Gauge TS906, Mounting, Placement tips

•Set one sensor to Channel 1 and the second sensor to Channel 2, etc. The sensors must operate on separate channels. Install 2 “AA” size batteries matching the polarities shown in the battery compartment.

IMPORTANT: When channel number is selected, it will be displayed on the sensor’s LCD display

•Replace the battery compartment door and secure the screws.

•Secure the thermo-hygrometer remote sensor in the desired location.

Mounting

•The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position

•Use the screws when mounting the thermo-hygrometer sensor on the wall

Placement tips:

•The remote thermo-hygrometer sensor should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions.

•Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a grassy lawn).

•Avoid placing the thermo-hygrometer sensor near sources of heat such as chimneys and heating elements.

•Avoid areas that collect or radiate heat from the sun, such as metal, brick/concrete structures, paving, or patio decks.

•The best location for temperature measurements is 4 feet (1.25meters) above the ground.

Rain Gauge TS906

FEATURES

•Precipitation measurement

•Remote rainfall data transmission to the main unit via 433 MHz signal

•100 feet (30 meters) transmission range without interference

•Built-in installation level A. Rain gauge bucket

Contains electronic components

B.Knob

Secures the top on the rain gauge bucket

C. Rain gauge feet

Secures the rain gauge in place

6