Installation Guide
10
69-2486—03
DONE
20
0120
DONE
1
0

TEST

M29488
During installer setup, press t
repeatedly until “Test” appears.
Test
number
System
status
Press t to
select test
Press t to
change status
Press DONE to terminate testing.
1 Cooling system 0 Compressor and fan turn off
1 Compressor and fan turn on
2 Second stage compressor turns on
2 Fan system 0 Fan tur ns off
1 Fan tur ns on
3 Heating system 0 Heat and fan turn off
1 Heat tur ns on (fan on if Function 0170 is set for heat pump,
or if Function 0180 is set to “1”)
2 Second stage heat tur ns on
4 Emergency
heating system
0 Em Heat and fan tur n off
1 Em Heat and fan tur n on
2 Second stage heat tur ns on (Auxiliary heat)
System test System status
CAUTION: EQUIPMEN T DAMAGE HAZARD. Compres sor protection is bypassed
during testing. To prevent equipment da mage, avoid cycling the compressor qui ckly.

Installer system test

Z-Wave enrollment

1. TojoinaZ-Wave
network, set the
Z-Wavecontroller
to INCLUDE mode.
2. Sel ect 1 to add
thermostat to
Z-Wavenetwork.
DONE
0
F
M32423A
10