The remote temperature and humidity for channel one, two and three can be recalled by pressing CHANNEL button.
The wave icon is located above the remote channel number and indicates the reception status from the remote sensor.
The following three types of reception status may be displayed:
The unit is in searching mode. |
|
Temperature and humidity readings are securely |
|
registered. |
|
No signals detected. | - - - |
NOTE: If the indoor or remote temperature and/or humidity goes above or below operating range stated in specifications, the main unit’s display will show dashes “- -
COMFORT LEVEL INDICATORS
The Wireless
11
Indicator | Temperature | Humidity | Shows current | |
displayed | Range | Range | condition | |
|
|
|
| |
| 20°C to 25°C | 40%RH- | Ideal for both | |
☺ | relative humidity | |||
(68°F to 77°F) | 70%RH | |||
and temperature | ||||
|
|
| ||
|
|
|
| |
| OVER | Contains excess | ||
| (23°F to122°F) | 70%RH | moisture | |
|
|
|
| |
| 5°C to 50°C | BELOW | Contains | |
| inadequate | |||
| (23°F to122°F) | 40%RH | ||
| moisture | |||
|
|
| ||
|
|
|
|
MAXIMUM AND MINIMUM MEMORY
The maximum and minimum record of the indoor and remote temperature and humidity will be automatically stored in the memory of the main unit (receiver).
To display the minimum, maximum or the current reading press the MEMORY button after desired mode (indoor or remote) is selected.
If no button is pressed for the next 15 seconds, the unit will return to the current temperature and humidity display for applicable mode.
To clear the memory, press and hold the MEMORY button for two seconds and all previously stored readings will be erased.
AUTO-SCANNING
Press and hold the CHANNEL button for 2 seconds – the icon “3” will appear on the main unit display above the COMFORT LEVEL indicator. The indoor temperature and all 3 remote temperatures will be
1112
