Moxa Technologies NE-4100 user manual NE-4110-ST LED Indicators, LED Name LED Color LED Function

NE-4100 Series User’s ManualPanel Layout and Pin Assignments

NE-4110-ST LED Indicators

LED Name	LED Color	LED Function
Power	red	Indicates the power is on.
		Steady on: Power is on and NE-4110 is
	green	functioning normally.
		Blinking: NE-4110 has been located by
		NE-4110 Administrator’s Location
Ready		function.
		1. Power is off, or power error condition
	steady off	exists.
		2. The IP address cannot be found in DHCP
		mode.
		3. IP address conflict.
DIO0	red	Indicates that DIO is in “low” (0) status.
DIO1	red	Indicates that DIO is in “low” (0) status.
DIO2	red	Indicates that DIO is in “low” (0) status.
DIO3	red	Indicates that DIO is in “low” (0) status.
TXD0	red	Indicates that TXD0 has a signal.
RXD0	red	Indicates that RXD0 has a signal.
DTR0	red	Indicates that DTR0 has a signal.
CTS0	red	Indicates that CTS0 has a signal.
DSR0	red	Indicates that DSR0 has a signal.
DCD0	red	Indicates that DCD0 has a signal.
RTS0	red	Indicates that RTS0 has a signal.
TXD1	red	Indicates that TXD1 has a signal.
RXD1	red	Indicates that RXD1 has a signal.

				NE-4110-ST Serial Port Pinouts
DB9 Male Connector for serial console					DB9 Male Connector for Connecting Serial Devices
	Pin	Signal				Pin	Signal
2		RXD	5		1		DCD	5
3		TXD			2		RXD
								4	8
5		GND	3		3		TXD	3
									7
			2		4		DTR	2
									6
								1
					5		GND
					6		DSR
					7		RTS
					8		CTS
				TXD+ TXD- RXD+ RXD- SGND D0			D1 D2	D3

Data+ Data-

2-8