Moxa Technologies Serial Settings, Serial Parameters, NE-4100 Series User’s Manual, Port alias

NE-4100 Series User’s Manual Web Console Configuration

Serial Settings

Click on the Serial Settings link on the left side of the screen to display serial settings. Make necessary changes to the settings and click on submit to validate the modifications.

Port alias

Setting	Factory Default	Necessity
1 to 15 characters	None	Optional
(E.g., PLC-No.1)

Port Alias is specially designed to allow easy identification of the serial devices which are connected to NE-4100 Series’ serial port.

Serial Parameters

Check the serial communication parameters in your Serial Device’s user’s manual. You should set up NE-4100’s serial parameters with the same communication parameters used by your serial devices.

Baud rate

Setting	Factory Default	Necessity
50 bps to 115.2 Kbps	115.2 Kbps	Required
NE-4100 supports a baud rate setting from 50 bps to 115.2 Kbps.
Data bits
Setting	Factory Default	Necessity
5, 6, 7, 8	8	Required

When the user sets Data bits to 5 bits, the stop bits setting will automatically change to 1.5 bits.

Stop bits

Setting	Factory Default	Necessity
1, 2	1	Required
Stop bits will be set to 1.5 when Data bits is	set to 5 bits.
Parity
Setting	Factory Default	Necessity
None, Even, Odd, Space, Mark	None	Required

6-8