Using the

7INSTANT Key

BEFORE ARMING,

close all doors and windows (see CHECKING FOR OPEN ZONES on page 13)

THE INSTANT MODE ARMS THE PERIMETER (INCLUDING THE ENTRY/EXIT DOOR), WITH NO ENTRY DELAY. PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY

ARMING PERIMETER ONLY

WITH ENTRY DELAY OFF

Use this key when staying inside and do not expect anyone to use an entry/exit door.

1.Enter your security code and press the INSTANT key.

2.The keypad beeps three times and displays the armed message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually takes place. See the note below.

3.After arming, an alarm sounds immediately if any protected perimeter door or window is opened, but you may otherwise move freely throughout the premises.

An alarm sounds immediately if anyone opens an entry/exit door.

If you wish to open the entry/exit door to let someone in after arming INSTANT, you can re-start the exit delay at any time – simply press the [✱] key, and then let that person in. This will avoid having to disarm the system and then re-arm it again.

N o t e : When you first arm the system in the INSTANT mode, “You may exit now” will be displayed on the second line of an Alpha keypad during the programmed exit delay. This delay is in effect in the system even when arming INSTANT. When the exit delay period ends, the system is fully armed in the INSTANT mode.

TYPICAL DISPLAYS – “ARMED INSTANT”

AC

S T A Y

INSTANT

FIXED-WORD

ARME D *INSTANT*

YOU M AY E XIT NOW

>ALPHA

The message “you may exit now “

disappears when the exit delay expires.

– 1 7 –