SYSTEM OVERVIEW

Alarms When an alarm occurs, both the keypad and external sounders will sound, and a message at the keypad will identify the zone(s) causing the alarm. In addition, if your system is connected to a central monitoring station, an alarm message will be sent. To stop the alarm sounding, you simply disarm the system.

Fire Protection When an alarm or trouble condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm or trouble (ex. FIRE, ALARM, CHECK). The display remains until it is cleared by entering the OFF sequence (security code + OFF key) twice.

Phone Access & Your system may include a phone module that will permit you to access the system via a Voice Response Touch-tone phone, either on-premises or by call-in when away. The phone access

Capability feature will enable you to do the following:

(Optional) • Receive synthesized voice messages over the telephone regarding the status of the security system.

•Arm and disarm the system and perform most function commands via the telephone, with voice confirmation provided after each command entry.

Paging Feature If the paging feature has been programmed for your system, your pager will respond to certain conditions as they occur in your system, and display code numbers indicating the type of condition that has occurred.

For detailed information, refer to PAGING FEATURE on page 25.

– 4 –