ENTRY/EXIT DELAYS

General Information Your system has preset time delays, known as exit delay and entry delay. When you arm your system, exit delay gives you time to leave through the entry/exit door without setting off an alarm. Entry delay gives you time to disarm the system when you re-enter through the entry/exit door. The system must be disarmed, however, before the entry delay period ends, or an alarm will occur. The keypad will beep slowly during the entry delay period, reminding you to disarm the system.

You can also arm the system with no entry delay at all by using either INSTANT or MAXIMUM arming modes. These modes can provide greater security while you are sleeping or while you are away for extended periods of time.

See your installer for your delay times and record them here:

Exit Delay:

 

seconds

Entry Delay:

 

seconds

Remember, there will be no entry delay when arming INSTANT or MAXIMUM.

Exit Delay When arming AWAY (see page 18) or MAXIMUM (see page 19), slow beeps will sound Alerting Sound from the keypad(s) during the exit delay, turning to fast beeps during the final five

seconds of the exit delay time.

Ask your installer if this feature is active for your system, and if so, check here:

– 1 2 –