Hoover C1415 warranty Assembling cleaner

1. Assembling cleaner

Carton contents

It is extremely important to read and follow all the assembly steps in order.

1-1

AB

F

C

G

D

E

H

Remove all parts from carton and identify each item shown. Make sure all parts, especially small items, such as G and F, are located before dis- posing of cardboard packaging.

A. Upper handle B. Lower handle

C.Cord

D.Dirt cup assembly

E.Cleaner body

F. Handle bolt and nut pack- et (One extra nut included) G. Dirt cup screws (2)

H. Dirt cup support

Step 1 Assemble handle

1-2D

C

Note: The white switch lock above the ON/OFF

(A)switch helps in the assembly of your cleaner.

Assembly can be continued if the switch lock is miss- ing. However, do not remove the switch lock until assembly is completed.

B

A

Align upper handle and lower handle as shown.

Place upper (B) and lower (C) handle parts on a flat surface, aligning rod sections (D). With hands on sides of handle, push parts together firmly until they “click” and rod sections lock together.

*Do not press against the grey rod extending from the lower handle shown in Fig. 1-3 (E). Do not push handle together with hands on ends of sections.

Step 2 Attach cord

1-3	“UP”	F		“UP”
E				UP
			G	E

Insert large rectangular end of cord into pocket in bot- tom of handle, with side marked “UP” visible.

Make sure rectangular end is pushed into the handle as far as possible.

Slide cord protector (F) toward upper handle (G).