Attach dirt cup assembly, Attach handle

1-4

Rotate cord protector (F) as shown.

1-5

With (F) pointing downward (toward back of handle), press groove (H) into slot (I).

Pull cord tight.

1-6

Press cord into place at each of the three notches indicated and note correct positioning of (F).

Do not plug cleaner in until assembly is totally complete.

Note proper placement of cord at notch as shown.

Step 3 Attach dirt cup assembly

1-7A

Release dirt cup latches (A) by pulling them outward. Remove cup and set it aside.

1-8

C C

Slide extensions (B) on lower back of cloth bag into slots (C) in lower handle.

1-9

Insert the two screws at area shown (D). Tighten screws.

1-10

Note round opening (E) and hooks (F) on back of cloth bag. Place opening over dirt tube (G).

Press down firmly to snap hooks into handle.

1-11

On upper handle, grasp bag clip retainer (H) and pull down firmly. Hook bag clip (I) into slot in retainer.

1-12

Note location of tapered rails (J) on dirt cup support (K) and on lower handle.

1-13

Slide rails on support onto rails (L) on lower handle until support snaps past the lock tab (M).

Continued ‹