What bags to buy
Use Hoover bag Type R with this cleaner.
To assure that your HOOVER clean- er operates at peak performance, it is imperative that you use only gen- uine HOOVER filter bags distributed by The Hoover Company. HOOVER bags can be identified by the trade- marks -
®
Changing filter bag
Disconnect cleaner from electrical outlet.
The bag is located behind the bag door at front of cleaner.
Depress bag door latch to open door; remove door.
Grasp collar to remove used bag.
Open pleats of new bag.
A
Fold edge of bag over collar, as shown, and hold in place while posi- tioning collar onto dirt tube.
Press firmly along dotted lines until collar is seated against five ribs (A) (in Fig.
Place bottom of bag door into slot on cleaner. Close door.
Secondary filter
Disconnect cleaner from electrical outlet.
The secondary filter protects the motor from dirt particles. It is located on the back wall behind the bag. When bag is removed, check the filter (it is not removable). Loosen dirt with a small brush and wipe off dirt particles with a slightly damp cloth. Dry thoroughly.
Rug/floor nozzle
To maintain cleaning effectiveness of your rug and floor nozzle, the brushes may need to be replaced occasionally.
See your nearest Hoover Factory Service Center or Authorized Warranty Dealer (Depot) for new brushes.
Lubrication
The motor is equipped with two bearings that contain sufficient lubri- cation for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubricant to either motor bearing.
6
