Silvercrest SEKU 2000 A16 Troubleshooting/Storage/Disposal, Malfunction causes and remedies

GB

IE

Troubleshooting/Storage/Disposal

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:

Defect	Possible cause			Solution
	The appliance is not switched on.			Switch the appliance on.
	The plug is not inserted.			Insert the plug into the
The flame replication does				mains power socket.
not light up.	The mains power socket does			Check the fuses
	not supply voltage
	The bulbs are defect.			Replace the defective bulbs.
	Switch		is not turned on.	Switch		on.
The appliance does not heat.	Switch	2	is not turned on.	Switch	2	on.
	Switch	3	is not turned on.	Switch	3	on.
	Heating level control defective			Inform Customer Services.
The fan does not run.	Switch		is not turned on.	Switch		on.
	Switch	2	is not turned on.	Switch	2	on.
	Fan defect.			Inform Customer Services.
	Thermostat 4 falsely adjusted.			Set the thermostat 4 at the
The heating is not switched off.				required temperature.
	Temperature control 4 defect.			Inform Customer Services.

NOTICE

►If you cannot solve the problem with the aforementioned methods, please contact Customer Services.

Storage/Disposal

Storage

Disconnect the plug if you are not intending to use the appliance for a long period.

Store the appliance at a dry locality.

Disposal of the appliance

Do not dispose of the apliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment).

Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

16 SEKU 2000 A1