![Rear view](/images/new-backgrounds/37394/3739427x1.webp)
Assembly
Step 7
Take the base plate 6 and insert 4 wood plugs B into the holes of the plate underside.
Then place the base plate 6 on the floor plate 7 so that the four wood plugs fit into the four holes in the floor plate.
Rear view | Front View |
| 6 |
B | B |
| |
| 7 |
Installing the appliance in the fire surround
To finalise, install the appliance in the assembled fire surround.
Place the appliance carefully on the base plate (from the rear of the fire surround) and then push it gently forward as far as it will go into the opening of the fire surround.
Secure the appliance to the fire surround at the edges with the fixing devices F and the screws 6 x 25 mm A .
Insert the plug into the mains power socket.
F
A
GB
IE
WARNING
Improper laying of the power cable can cause damage to people and property! Pay heed to the following safety information to avoid these risks:
►Do not bend or clamp the power cable and do not lay it tautly.
►Do not run the power cable over sharp edges.
SEKU 2000 A1 | 13 |