Assembly
Then, bring the front panel 4 and side panel 8 together at right angles, so that the locking pins D enter the holes on the right edge of the side panel.
When done, screw all three adapter sleeves E to the right with the screwdriver until the locking pins are clamped into the adapter sleeves and the panels are seated firmly together and at right angles.
Step 3
Take the centre front panel 5 and lay it face down.
Then place four adapter sleeves E in the four large holes. Turn the adapter sleeves with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the centre front panel 5 .
Insert four double locking pins C in the upper holes on the front sides of the panel and turn the adapter
sleeves E with the screwdriver to the right until the locking pins are firmly secured.
C
C | E |
5
Step 4
Now connect the so prepared centre front panel 5 with the side panels prepared in steps 1 and 2.
For this, insert two adapter sleeves E in the large holes in the side panels. Turn the adapter sleeves E with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side panels.
Then, guide each of the double locking pins C of the centre front panel 5 into the corresponding holes in the edges of the side panels.
When done, turn all four adapter sleeves E in the centre front panel 5 with the screwdriver to the right, until all parts are at right angles to each other and firmly tightened.
E
E
5
GB
IE
SEKU 2000 A1 | 11 |