Assembly
GB
IE
Assembly
Step 1
Screw three single locking pins D with a screwdriver into the prepared holes on the left front panel 2 .
Place two wood plugs B into the holes of the front panel 2 .
Insert three adapter sleeves E into the three large holes of the left side panel . Thereby, with the screwdriver line up the adaptor sleeves E so that the arrow on the adaptor sleeves points to the outer edge of the side panel .
D
B | D | E |
|
2
D
Then, bring the front panel 2 and side panel together at right angles, so that the locking pins D enter the holes on the left edge of the side panel .
When done, screw all three adapter sleeves E to the right with the screwdriver until the locking pins are clamped into the adapter sleeves and the panels are seated firmly together and at right angles.
Step 2
Screw three single locking pins D with a screwdriver into the prepared holes on the right front panel 4 .
Place two wood plugs B into the holes of the front panel 4 .
Insert three adapter sleeves E into the three large holes of the right side panel 8 . Thereby, with the screwdriver line up the adaptor sleeves E so that the arrow on the adaptor sleeves points to the outer edge of the side panel 8 .
D
8
D
E
D
B
4
10 | SEKU 2000 A1 |
|