Assemble handle

 

1-3

 

 

 

 

 

B

 

 

 

 

1-2

 

 

A

 

 

 

1-4

Assemble Handle

Press down on latch (A) and remove clean solution tank from upper handle.

With cord hook (B) to back of cleaner, push upper handle down onto cleaner. Insert short screw in front of tank area. Tighten screw with a Phillips screw- driver.

Insert the two longer screws into back of handle as shown. Tighten with a Phillipa screwdriver.

1-5

Replace clean solution tank by posi- tioning bottom first. Press latch and snap top portion into place.

4

Continued

Page 16
Image 16
Hoover FloorMATETM The Hard Floor Cleaner owner manual Assemble handle