Hoover FloorMATETM The Hard Floor Cleaner How to use, ON/OFF Switch Handle Release Pedal

2. How to use
2-1
								1
									2
	3
									5
					4
																		18
														6
																7					19
	9
																8
									10
						17														17
			14
										12
																	11
	13
											14
	15																		20
															13
		16

The assembled cleaner will look like this drawing.

1.Hand grip

2.Solution trigger: squeeze to release clean solution.

3.Brush control switch: Turns brushes ON for wet cleaning and OFF for wet pickup and dry vacu uming.

4.Clean solution tank release

5.Clean solution tank cap/ measuring cup

6.Clean solution tank

7.ON/OFF switch

8.Recovery tank lid and filter

9.Recovery tank release

10.Recovery tank: Collects dry debris as well as dirty cleaning solution.

11.Wet/Dry pedal: Press pedal to change between wet and dry cleaning.

12.Wet/Dry indicators: Shows either wet or dry cleaning usage.

13.Nozzle release buttons: Release nozzle for easy clean-up.

14.Brush release buttons: Remove brushes for easy clean-up.

15.Nozzle

16.Squeegee

17.Handle release pedal

18.Cord hooks: Top hook rotates for quick cord release.

19.Carrying handle

20.Soft-tread wheels

This cleaner is intended for house- hold use.

Operate cleaner only at voltage specified on data plate on back of cleaner.

Plug cleaner into a properly grounded outlet.

2-2 2-3 2-4

A

		B
ON/OFF Switch	Handle Release Pedal
Push switch (A) up to turn cleaner on.	Step on pedal (B) to lower handle to
Push switch down to turn cleaner off.	operating position. Handle does not
	lock into a single position but “floats”
	to allow convenient operation.

To transport

To move your cleaner from room to room, put handle in upright position; tilt cleaner back on rear wheels and push forward.

Continued 5