'

Fuse blown, or the

Replace fuse or reset circuit breaker. Remove any other

 

circuit breaker acted

appliances sharing the same circuit with the dishwasher

 

 

 

 

Power supply is not

Make sure the dishwasher is turned on and the door is

 

turned on

closed securely.

 

 

Make sure the power cord is properly plugged into the

 

 

wall socket.

 

 

 

 

Water pressure is low

Check that the water supply is connected properly and

 

 

the water is turned on.

 

 

 

'

Overflow

The system is designed to detect an overflow. When it

 

 

does, it shuts off the circulation pump and turns on the

 

 

drain pump.

 

 

 

 

Some audible sounds are

Sound from soft food shredding action and detergent cup

 

normal

opening.

 

 

 

 

Utensils are not secure

To ensure everything is secured in the dishwasher.

 

in the baskets or something

 

 

small has dropped into

 

 

the basket

 

 

 

 

 

Motor hums

Dishwasher has not been used regularly. If you do not use it

 

 

often, remember to set it to fill and pump out every week,

 

 

which will help keep the seal moist.

 

 

 

 

Improper detergent

Use only the special dishwasher detergent to avoid suds.

 

 

If this occurs, open the dishwasher and let suds evaporate.

 

 

Add 1 gallon of cold water to the tub. Close and latch the

 

 

dishwasher, then drain out the water by slowly turning the

 

 

Dial until a drain period is reached. Repeat if necessary.

 

 

 

 

Spilled rinse agent

Always wipe up rinse agent

 

 

spills immediately.

 

 

 

 

Detergent with

Make sure that the detergent is the one without colorant.

 

colorant was used

 

 

 

 

 

Rinse agent dispenser

Make sure that the rinse agent dispense is filled.

 

is empty

 

 

 

 

 

Improper program

Select stronger program

 

 

 

 

Improper rack loading

Make sure that the action of the detergent dispenser and

 

 

spray arms are not blocked by large dishware.

 

 

 

Extremely hard water

Low inlet temperature

Overloading the dishwasher

Improper loading

Old or damp powder detergent

Empty rinse agent dispenser Incorrect dosage of detergent

To remove spots from glassware:

Take out all metal utensils out of the dishwasher.

Do not add detergent.

Choose the longest cycle.

Start the dishwasher and allow it to run for about 18 to 22 minutes, then it will be in the main wash.

Open the door to pour 2 cups of white vinegar into the bottom of the dishwasher.

Close the door and let the dishwasher complete the cycle. If the vinegar does not work: Repeat as above, except use 1/4 cup (60 ml)of citric acid crystals instead of vinegar.

12

Page 14
Image 14
Hoover HEDS 668-80 Fuse blown, or, Circuit breaker acted, Power supply is not, Turned on Closed securely, Wall socket

HEDS 668S-80, HEDS 668-80 specifications

The Hoover HEDS 668-80 and HEDS 668S-80 are advanced sensor modules widely recognized for their precision and reliability in various applications. Both models serve prominently in the realm of motion detection and optical encoders, making them indispensable in robotics, industrial automation, and consumer electronics.

At the core of these sensors is the use of integrated photodetectors and light emitters, which work together to accurately capture motion data. The HEDS 668-80 features a compact design, allowing for easy integration into numerous hardware configurations. It incorporates a dual-channel output, which provides both quadrature and single-ended output signals. This feature enables enhanced motion control and allows for more accurate detection of direction, making it suitable for applications requiring precise angular measurements.

One of the standout technologies in the HEDS series is its use of reflective optical sensing. This technology minimizes interference from ambient light conditions, ensuring reliable performance even in varying environmental settings. The sensors are designed with a resolution of up to 500 counts per revolution, allowing for finely-tuned control in robotic applications.

The HEDS 668S-80 enhances the capabilities found in the 668-80 model by offering an increased tolerance for temperature variations and shock resistance. This makes it an ideal candidate for harsh operating conditions, where reliability is paramount. The HEDS 668S-80 also boasts an improved response time, further enhancing the performance in high-speed applications.

Both models feature a straightforward mounting system that facilitates installation and adjustment, allowing engineers to set up their systems quickly and efficiently. Additionally, their robust construction ensures durability across extended periods of use, providing a long lifespan in demanding applications.

In summary, the Hoover HEDS 668-80 and HEDS 668S-80 represent advanced sensor technology that combines high performance with robust design. Their integrated features cater to a variety of applications, making them a vital component in the ever-evolving landscape of automated systems and precision measurement. As industries increasingly rely on automation, these sensors offer the reliability and accuracy that engineers need to achieve optimal performance in their projects.