Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for tw o weeks or more. HYDROGEN GAS IS EXPLOSI VE.

If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water f aucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not sm oke or use an open flame during this time.

„This appliance complies with international

safety standards, and is fitted with a plug with earth connection to ensure compl ete earthing of the product.

Before connect ing the appliance to the mains suppl y it is important to ensure:

That the supply socket is properly earthed. That your electricity supply is capable of meeting the consumption requirements listed on the rating plate of your appliance.

„Ensure that your product is properly earthed. In the absence of adequate earthing you will notice that when touching the metal parts of your appliance an

electrical dispersion can be felt, due to the presence of a radio interference suppressor.

This appliance complies with Directives 89/336/EEC, 73/23/EEC and following changes.

„Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

„Do not touch the heating element during or immediately after use.

„Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufactures recommendations.

„Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap , laundry detergent, or hand washing detergent in your dishwasher. Keep these products out of children.

„Keep child away from detergent and rinse aid, keep child away from the open door of the dishwasher, there could still be some detergent left inside.

„The door should not be left in the open position since this could present a tripping hazards.

„During installation, the power supply must not be excessively or dangerously bent or flattened.

„Do not tamper with controls.

„The appliance is not intended for use by young children or infirm persons without supervision.

„Dishwasher detergents are strongly alkaline,they can be extremely dangerous if swallowed.Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.

„Important: when the appliance location i s on carpet floors, attention must be paid so as to ensure that there is no obstruction to the bottom vents.

„Do not operate your dishwasher unless all enclosure panels are properly inplace. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out.

„Do not place any heavy objects of stand on the door when it is open. The appliance could tip forward.

„When loading items to be washed:

1)Locate sharp items so that they are not likely to damage the door seal;

2)Load sharp knives with the handles up to reduce the risk of cut-type injuries.

„When using your dishwasher, you should prevent plastic item from contacting with heating element.

„If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoi d a hazard.

„Please dispose of packing materials properly.

„Use the dishwasher only for its intended function.

„Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.

„Young children should be supervised to ensure that they do not play with the appliance.

„Check that the detergent receptable is empty after completion of the wash cycle.

„Cutlery is washed best if it is placed in the basket with handles downwards.

Warning:

knives and other utensil s with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

1

Page 3
Image 3
Hoover HEDS 668S-80, HEDS 668-80 manual „ Do not tamper with controls

HEDS 668S-80, HEDS 668-80 specifications

The Hoover HEDS 668-80 and HEDS 668S-80 are advanced sensor modules widely recognized for their precision and reliability in various applications. Both models serve prominently in the realm of motion detection and optical encoders, making them indispensable in robotics, industrial automation, and consumer electronics.

At the core of these sensors is the use of integrated photodetectors and light emitters, which work together to accurately capture motion data. The HEDS 668-80 features a compact design, allowing for easy integration into numerous hardware configurations. It incorporates a dual-channel output, which provides both quadrature and single-ended output signals. This feature enables enhanced motion control and allows for more accurate detection of direction, making it suitable for applications requiring precise angular measurements.

One of the standout technologies in the HEDS series is its use of reflective optical sensing. This technology minimizes interference from ambient light conditions, ensuring reliable performance even in varying environmental settings. The sensors are designed with a resolution of up to 500 counts per revolution, allowing for finely-tuned control in robotic applications.

The HEDS 668S-80 enhances the capabilities found in the 668-80 model by offering an increased tolerance for temperature variations and shock resistance. This makes it an ideal candidate for harsh operating conditions, where reliability is paramount. The HEDS 668S-80 also boasts an improved response time, further enhancing the performance in high-speed applications.

Both models feature a straightforward mounting system that facilitates installation and adjustment, allowing engineers to set up their systems quickly and efficiently. Additionally, their robust construction ensures durability across extended periods of use, providing a long lifespan in demanding applications.

In summary, the Hoover HEDS 668-80 and HEDS 668S-80 represent advanced sensor technology that combines high performance with robust design. Their integrated features cater to a variety of applications, making them a vital component in the ever-evolving landscape of automated systems and precision measurement. As industries increasingly rely on automation, these sensors offer the reliability and accuracy that engineers need to achieve optimal performance in their projects.