Hoover HPM150, HPM130, HPM110, HPM120 manual Electricity supply and safety advice

Models: HPM130

1 32
Download 32 pages 6.57 Kb
Page 10
Image 10
Electricity supply and safety advice

05651318.qxd 31-07-03 21:38 Page 10

To ensure the drum is thoroughly clean after testing and storage, select programme 1 and run the machine for a complete cycle using only wash detergent and water.

If the machine is not to be used immediately, switch off the mains power supply and remove the plug from the power socket. We also recommend that the water stop taps are turned off.

Note: it is advisable to isolate the washing machine from the water and electricity supplies after each wash.

Electricity supply and safety advice

Washing machines are supplied to operate at a voltage of 240V, 50 Hz single- phase. Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the plug to a 13A earthed socket.

Electricity can be extremely dangerous. This washing machine must be earthed.

The socket outlet and the plug on the appliance must be of the same type.

It is not advisable to use multiple adapters and/or extension leads.

The wires in the mains lead are coloured in accordance with the following codes: Blue – NEUTRAL

Brown – LIVE

Green and Yellow – EARTH

If the mains cord on this appliance is damaged, it must be replaced by a special cord which is only obtainable from the Hoover spares service,

GIAS (01204 556111).

10

Page 10
Image 10
Hoover HPM150, HPM130, HPM110, HPM120 manual Electricity supply and safety advice