05651318.qxd 31-07-03 21:38 Page 12

Description of Controls

All the controls on your product’s control panel are listed as follows. The button functions are selected when the buttons are pressed in. Carefully read the relevant descriptions detailed below:

On/Off

After selecting the programme press the on/off button to start the machine. At the end of the cycle press again to reset the button and switch off the appliance.

Power on

Power off

Door Locked Indicator Light

A special safety device prevents the door from being opened immediately after the end of the cycle. A ‘Door locked’ indicator light is illuminated when the door is fully closed. Wait for 2 minutes after the wash cycle has finished and the door locked neon has gone off before opening the door. As a safety measure check that there is no water evident in the drum.

Super Rinse

This option adds more water at the rinsing stage. This can help to avoid skin irritation from detergent residues for people with particularly sensitive skin. Selecting the Super Rinse button is also recommended when washing heavily soiled fabrics, requiring the use of a lot of detergent, or when the wash load contains items made of towelling whose fabrics have a greater tendency to retain detergent.

Creaseguard

This option is available on delicates and woollens. When this option is selected the machine will stop and the load will be held within the water in the drum. This reduces the creasing. To continue with the wash cycle the Creaseguard button must be pressed and the programme will re-start.

Fast Wash button

This option can be utilised on cottons and synthetics programmes. By selecting the option, the wash time may be reduced by up to 50 minutes, depending on the programme selected.

12

Page 12
Image 12
Hoover HPM130, HPM110, HPM150, HPM120 manual Description of Controls, On/Off