Hoover Turbo POWER Carpet Cleaner with Auto Rinse Cleaner manual

Cleaning upholstery

Read “Before you begin cleaning” instructions on page 10.

Be sure to check the cleaning code on your upholstery. Use your carpet clean- er only on upholstery marked “W” or “W/S”.

1.Attach hose and solution tube as instructed in Figs. 3-11 to 3-13.

2.Place handle in upright position.

Agitator brushes will not rotate while handle is in upright position.

3.Fill clean water tank according to instructions for Figs. 2-9 to 2-12.

4.Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15.

5.Attach tool to end of hose.

Do not point tools toward people or pets.

6.Dry hands and plug carpet cleaner into a properly grounded outlet.

7.Set Rinse Setting switch to WASH- AutoRinse™ . Turn cleaner ON.

Note: “Auto-rinse” and rinse are not available during tool use. The hose will only dispense water mixed with deter- gent.

3-21

8.Gently press the tool onto the fabric. Press the trigger and slowly pull the noz- zle over the fabric.

9.Overlap strokes by 1/2 inch to help prevent streaking.

Make additional strokes without pressing the trigger to remove more moisture.

10.To clean in corners or creases, lift the tool one-half inch from the fabric and press the solution trigger.

11.Vacuum up the solution with the tool without pressing the trigger.

12.For heavily soiled areas, it may be necessary to repeat the cleaning process. Make crisscrossing strokes to the original pattern; overlap each pass (Fig. 3-22).

3-22

Make no more than 2 passes with the solution or rinse over any one area to prevent over-wetting and damage to fabric.

If additional cleaning is necessary, wait until the upholstery is completely dry before using the tool again.

13.Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”, Fig. 2-6).

When finished cleaning, follow “After cleaning” instructions on pages 11 & 12 and “After using tool” instructions on page 14.

4. Maintenance

Removable brushes

Your carpet cleaner is equipped with removable brushes for easy cleaning.

To remove brushes

Disconnect cleaner from electrical outlet.

To prevent possible leaking, remove clean water tank and recovery tank. Set tanks aside.

4-1

With handle in upright position, tilt cleaner back until handle rests on the floor.

4-2

Grab brush assembly and pull firmly.

The brushes can be cleaned under run- ning water.

4-3	B	D	B
		D	B
A
			A
		C

To replace brushes

Align posts (A) on both ends of brush assembly with slots (B) in cleaner hous- ing.

Make sure that the square post (C) also aligns with the square hole (D). Turn brushes slightly until post fits easily into hole.

Press brush assembly firmly to snap into place.

Continued ➜

Turbo POWER Carpet Cleaner with Auto Rinse Cleaner specifications

The Hoover Turbo POWER Carpet Cleaner with Auto Rinse is a cutting-edge cleaning device designed to maintain the cleanliness and freshness of your carpets. This powerful carpet cleaner combines advanced technology with user-friendly features, making it an essential tool for anyone seeking effective carpet care in their home.

One of the standout features of the Hoover Turbo POWER is its Auto Rinse technology. This innovative system automatically rinses carpets as you clean, ensuring that they are left residue-free. By reducing the amount of soap left in the fibers, the Auto Rinse function minimizes the time carpets take to dry while preventing the re-soiling that often occurs from leftover cleaning agents. This feature is particularly beneficial for households with pets or children, where frequent cleanings are a necessity.

The carpet cleaner boasts a robust motor and suction capabilities that effectively lift deep-down dirt, stains, and odors, making it ideal for removing tough blemishes and pet messes. It features a Dual V nozzle for even suction across the cleaning path, ensuring that dirt is thoroughly extracted from carpets of all types. The large-capacity water tanks allow users to clean more area without frequent refills, streamlining the cleaning process.

In addition to its powerful performance, the Hoover Turbo POWER is designed with user comfort and convenience in mind. Its lightweight construction makes it easy to maneuver across large rooms and up and down stairs. The cleaner is equipped with a range of attachments, including a pet tool and crevice tool, allowing users to tackle a variety of surfaces and hard-to-reach areas.

Moreover, the Hoover Turbo POWER emphasizes versatility. It can be used on both carpets and upholstery, providing a comprehensive cleaning solution for your home. The machine's quick-release foot also enhances its usability, allowing for easy transition between cleaning carpets and other surfaces.

Overall, the Hoover Turbo POWER Carpet Cleaner with Auto Rinse combines advanced cleaning technologies with practical features that enhance user experience. Its powerful suction, innovative Auto Rinse capability, and versatile attachments make it a top choice for anyone looking to invest in a reliable carpet cleaner that ensures a deep, thorough clean every time.

Hoover Turbo POWER Carpet Cleaner with Auto Rinse Cleaner Removable brushes, To remove brushes

Models: Turbo POWER Carpet Cleaner with Auto Rinse Cleaner