Hoover U57809RM owner manual Position Tools, Cleaner Assembly Carton contents

1.CLEANER ASSEMBLY Carton contents

1-1	A
D
	B
	C

A.Handle section

B.Cleaner base and upper housing assembly

C.Cleaning tools and wands

D.Powered Hand Tool

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing materials.

Attach handle
1-2	1-3	1-4
		A

Using a Phillips screwdriver, remove (2) screws from the top of the upper housing assembly.

Insert handle section (A) into upper housing assembly. Push down firmly until you hear a click.

Fasten (2) screws on either side of handle base.

Position Tools

1-5	Place smaller diameter
	end of wand (A) into
B	bottom of rack. Snap
	wand into clip at top.
C	Repeat with other wand.
A	Crevice tool (B) fits into
	one of the extension
	wands.
	Fit combination tool (C)
	into storage area on side
	of cleaner as shown.

1-6 A

Fit powered hand tool (A) into recessed area on front of cleaner. Pivot toward handle to snap in place.

4