Hoover U57809RM Cord Rewind, Cleaner, Handle Positions, Carpet Height Adjustment, Settings

Cord

Rewind

2-4	Grasp the end
	of the plug
	and pull to
	release cord
	from cord
	reel. After
	desired cord
	length is
A	reached, the
	cord will lock
	into position.

To return cord for storage, hold plug and press on button (A) at top of cord reel. To prevent cord from whipping, hold plug until cord is rewound.

Transporting

Cleaner

2-5

To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.

Handle

Positions

2-6		The handle
		of your
		cleaner
1	2	has three
		positions;
		upright for
		storage and
	3	when using
		cleaning
		tools;
		operating
position for general operation on

carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle.

Carpet Height

Adjustment

2-7	The cleaning
	of carpet and
	rugs takes
A	place at the
	nozzle (A).
B	When it is
	necessary
	to raise and
	lower the
	nozzle for
various carpet pile heights, turn

the nozzle control knob (B) to the desired setting.

Settings

2-8	For maximum cleaning performance,
	the following carpet height settings
	are recommended:

•Lowest setting: for all types of carpet.

Note: If the cleaner is difficult to push, turn knob to the next higher setting.

•Higher settings: for very deep

pile carpet, where easier pushing effort is desired, while maintaining good cleaning performance.

Agitator Brush Roll Shut-Off

2-9 The agitator brush roll shuts off automatically for tool use,

Bwhen the cleaner is in the upright position.

A

To manually shut off the agitator brush roll for cleaning hard floors, step on the pedal (A). The indicator (B) will show red in the “brush roll off” window. To turn the agitator brush roll on, step on the pedal again. The indicator will show red in the “brush roll on” window.

6