Pioneer DVH-P7000 owner manual Initial Settings, Adjusting initial settings, Setting the time

Initial Settings

Adjusting initial settings

1

Initial settings lets you perform initial set up of different settings for this unit.

1FUNCTION display

Shows the function status.

1Press SOURCE and hold until the unit turns off.

• Pressing SOURCE on the head unit also per- forms the same operation.

2Press F and hold until time appears in the display.

• Pressing and holding FUNCTION on the head unit also performs the same operation.

3Press F to select one of the initial settings. Press F repeatedly to switch between the follow- ing settings:

CLOCK—WARN—AUX—DIM—BRIGHT—SW—(D.ATT)—TEL—DVD

Use the following instructions to operate each particular setting.

•To cancel initial settings, press BAND/ESC.

•You can also cancel initial settings by holding down F until the unit turns off.

•Pressing FUNCTION on the head unit also performs the same operation.

•D.ATT can only be operated when you have connected the Multi-channel processor (DEQ- P7000) to this unit. For details. refer to the Muliti-channel processor (DEQ-P7000) owner’s manual.

Section

10

Setting the time

This is used to set the time on the unit’s clock	English
display.
1 Press F to select the CLOCK.
Press F until the time appears in the display.

•Pressing FUNCTION on the head unit also performs the same operation.

2 Select the portion of the time display you	Español
wish to set with 1or ¡.
Pressing 1or ¡will select a portion of the
clock display:
HOUR—MINUTE
As you select portions of the clock display the	Deutsch
portion selected will blink.
• Pressing 2or 3on the head unit also per-
forms the same operation.	Français
Pressing Ewill increase the selected hour or
3 Select the correct time with Eor e.
minute. Pressing ewill decrease the selected
hour or minute.
• Pressing 5or ∞on the head unit also per-
forms the same operation.	Italiano

Nederlands

En 73