Pioneer DVH-P7000 Setting for digital output, Precaution, Digital output Setting detail

Section

09Initial Settings for DVD player

3Move the joystick up/down to select angle mark display ON/OFF.

The currently set option is indicated the mark “ ”. The option selected with the joystick is indicated in blue.

4Click the joystick.

Angle mark display is set ON/OFF.

Notes

•You can also switch the angle during playback with ANGLE. (Refer to page 29.)

•Pressing RETURN takes you back to the previ- ous display.

Setting for digital output

(DIGITAL OUTPUT)

Set digital output correctly to match the compo- nents you are using with this unit. There is no need to change settings if this unit is not con- nected for digital output.

Precaution

•Incorrect setting may result in noise and dam- age to speakers so be sure to read the manu- als of the connected components.

1Move the joystick up/down to select

DIGITAL OUTPUT in the second SET UP MENU.

DIGITAL OUTPUT is indicated in blue.

2Click the joystick.

Digital output setting menu is displayed.

3Move the joystick up/down to select the desired digital output setting.

The currently set digital output setting is indi- cated the mark “ ”. The digital output setting selected with the joystick is indicated in blue.

Digital output	Setting detail
Dolby D/LPCM	Select when using a Dolby
	Digital compatible amp and
	decoder. The Dolby Digital
	signal is output as it is. (Initial
	setting)
LPCM	Select when using an amp and
	decoder that are not Dolby
	Digital compatible. The Dolby
	Digital signal is converted to
	and output as a linear PCM
	signal.

4 Click the joystick.

The selected digital output setting is set.

Notes

•Linear PCM output of DTS audio is not possi- ble. If you select LPCM, DTS audio is not out- put.

•When using this unit with a Pioneer Multi- channel processor with digital input (DEQ- P7000), select Dolby D/LPCM.

•Pressing RETURN takes you back to the previ- ous display.

70En