Pioneer DVH-P7000 owner manual Using non fading output, Using the high pass filter

Section

08Audio Adjustments

Using non fading output

When the non fading output setting is on, the audio signal does not pass through this unit’s low pass filter (for the subwoofer), but is output through the RCA output.

1Press A to select non fading output on/off mode.

When the subwoofer controller setting is S.W Control:EXT, you can select non fading output on/off mode. Press A until NonFad ON appears in the display.

• Pressing AUDIO on the head unit also per- forms the same operation.

2Press Eto turn non fading output on. NonFad ON appears in the display. Non fading output is now on.

• You can turn off non fading output by pressing e.

• Pressing 5or ∞on the head unit also per- forms the same operation.

Adjusting non fading output level

When the non fading output is on, you can adjust the level of non fading output.

1Press A to select non fading output setting mode.

Press A until NonFad 0 appears in the display.

• Pressing AUDIO on the head unit also per- forms the same operation.

2Press Eor eto adjust the output level of the non fading.

Each press of Eor eincreases or decreases the level of the non fading (e.g., +6 to –6).

Press Eor euntil you see the desired value displayed.

• Pressing 5or ∞on the head unit also per- forms the same operation.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, switch the HPF (high pass filter) on. Only frequencies higher than those in the selected range are output from the front and rear speakers.

1 Press A to select HPF.

Press A until HPF appears in the display.

•Pressing AUDIO on the head unit also per- forms the same operation.

2Press Eto turn high pass filter on.

HPF 80 Hz appears in the display. High pass filter is now on.

• To turn high pass filter off, press e.

• Pressing 5or ∞on the head unit also per- forms the same operation.

3Press 1or ¡to select a high pass filter range.

Press 1and HPF 50 Hz is displayed. Press ¡ and 125 Hz is displayed. Only frequencies higher than those in the selected range are output from the front or rear speakers.

• Pressing 2or 3on the head unit also per- forms the same operation.

Note

•If you switch the SFEQ mode, the H.P.F. func- tion is automatically switched off. By switch- ing the H.P.F. function on after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ function.

62En