Pioneer DVH-P7000 owner manual Tuner, Listening to the radio

Tuner

Listening to the radio

1 2 3

4

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on page 22.

1STEREO (ST) indicator

Shows that the frequency selected is being broadcast in stereo.

2BAND indicator

Shows which band the radio is tuned to, AM or FM.

3PRESET NUMBER indicator

Shows what preset has been selected.

4FREQUENCY indicator

Shows to which frequency the tuner is tuned.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

•Pressing SOURCE on the head unit also per- forms the same operation.

2Use VOLUME to adjust the sound level. Press VOLUME to increase or decrease the vol- ume.

• Rotating VOLUME on the head unit also increases or decreases the volume.

3Press BAND/ESC to select a band.

Press BAND/ESC until the desired band is dis- played, FM1, FM2, FM3 for FM or AM.

•Pressing BAND/ESC on the head unit also performs the same operation.

Section

03

4 To perform manual tuning, press 1or
¡with quick presses.	English
The frequencies move up or down step by step.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
5 To perform seek tuning, press and hold 1
or ¡for about one second and release.
The tuner will scan the frequencies until a	Español
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
1or ¡with a quick press.
• If you press and hold 1or ¡you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.	Deutsch
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Note
• When the frequency selected is being broad-
cast in stereo the STEREO (ST) indicator will
light.	Français
	Italiano
	Nederlands

En 21