Pioneer DVH-P7000 Setting the rear output and sub- woofer controller, Switching the telephone

Initial Settings

2Select the desired brightness with Eor e.

• The display shows 0 – 15.

• Pressing 5or ∞on the head unit also per- forms the same operation.

Setting the rear output and sub- woofer controller

This unit’s rear output (rear speaker leads out- put) can be used for full-range speaker (Rear SP:FULL) or subwoofer (Rear SP:S.W) connec- tion. If you switch rear output setting to the Rear SP:S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxil- iary amp.

Initially, the unit is set for rear full-range speaker connection (Rear SP:FULL).

When rear output are connected to full range speakers (when Rear SP:FULL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controller’s (low pass filter, phase) built-inS.W Control:INT or the auxiliary S.W Control:EXT.

Notes

•Even if you change this setting, there is no output unless you switch the non fading out- put (refer to page 62) or subwoofer output (refer to page 61) in the audio menu on.

•If you change the subwoofer controller, sub- woofer output and non fading output in the audio menu return to the factory settings.

•Both rear speaker leads output and RCA rear output are switched simultaneously in this setting mode.

Section

10

1 Press F to select SW.
Press F repeatedly until Rear SP appears in the	English
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Change the rear output setting with Eor
e.
Pressing Eor ewill switch between Rear SP	Español
:FULL (full-range speaker) and Rear SP :S.W
(subwoofer) and that status will be displayed.
• Pressing 5or ∞on the head unit also per-
forms the same operation.
Notes	Deutsch
• When no subwoofer is connected to the rear
output, select Rear SP:FULL.
• When a subwoofer is connected to the rear
output, set for subwoofer Rear SP:S.W.
• When the rear output setting is Rear SP:S.W,
you cannot change the subwoofer controller.
3 Change the subwoofer controller with 1	Français
Control :INT and S.W Control :EXT and that
or ¡.
Pressing 1or ¡will switch between S.W
status will be displayed.
• Pressing 2or 3on the head unit also per-
forms the same operation.
Switching the telephone	Italiano
muting/attenuation
Sound from this system is muted or attenuated
automatically when a call is made or received	Nederlands
using a cellular telephone connected to this
product.
1 Press F to select TEL.
Press F repeatedly until Telephone appears in
the display.

En 75