Apple ED-A111, ED-A101 manual Adjusting the projection position, Adjusting the zoom

Operating

Adjusting the projection position

This projector has four elevator feet in the bottom. Use them to adjust the projection position.

max. 43 mm

Elevator feet

CAUTION ►Do not lengthen the elevator feet to 43 mm or more. The foot lengthened exceeding the limit may come off from the projector, and result in an injury. ►Tilt the projector with these elevating feet only.

►Do not tilt the projector over 5 degrees, when it is suspended from a ceiling or somewhere.

Adjusting the zoom

Press the D-ZOOM + or D-ZOOM – button on the remote control to display D-ZOOM dialog on screen.

Use the D-ZOOM + and D-ZOOM – buttons to adjust the picture size. To fi nish the operation, do not touch these buttons for a few seconds until the dialog is disappeared.

●If you want to expand a part of the image, use the magnify function

(23).

Adjusting the picture position

Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT dialog on screen. Use the ▲, ▼,

◄and ► buttons to adjust the picture position. Press the POSITION button again to fi nish this operation.

●This is a function to shift the position of the shrunken picture by the zoom function.

●The function is not available, if any menu is displayed on screen.

●The function is not available, if the D-ZOOM is adjusted to 100 (full screen) on its dialog.

D-ZOOM + button

OFF

KEYSTONE	MY BUTTON		MUTE
	1		2
- FOCUS +		- D-ZOOM +
POSITION			MENU
ESC			RESET

D-ZOOM – button

OFF

KEYSTONE	MY BUTTON		MUTE
	1		2
- FOCUS +		- D-ZOOM +
POSITION			MENU
	ENTER
ESC			RESET

POSITION button

20